Headboards can drastically change the look of your bedroom, according to the materials and methods of finishing. Textile and wood head designs can be expensive to buy, but are not complicated to build tufted headboard king.
Education to build tufted headboard king: cut 90-inch long sections batting to cover the height, borders, and four inches at the back of the plywood panel 3 meters high. Spray adhesive on the face of the plywood panel. Press the strips of batting on the plywood, and then attach it.
15 Picture Gallery: How to Build Tufted Headboard King
Turn the plywood on which the batting side is facing down. Spray the edges and a perimeter of two inches around the back side of the card. Pull the batting over the edge and bow to the plywood with a heavy duty staple gun.
Cut a long strip of fabric. Place the fabric down on a flat surface. Center the plywood, the batting side down, on the rear side of the fabric. Pull one side of the fabric over the plywood and staple it to the council. Work from the center to the corners. Locate the wall studs behind the bed. Fix the wall sections of two wall hooks in the wall. Screw the remaining part. Hang the tufted headboard king on the wall.
This post topic: Beds